Description
The green open-top parcel sorting bag is designed for courier depots, parcel hubs, e-commerce fulfillment centers, last-mile delivery stations, and warehouse transfer operations that need to consolidate a large number of packages inside a relatively compact floor footprint.
The standard configuration measures 58 × 44 × 85 cm, using a tall vertical structure rather than a wide, low container. This makes the bag particularly useful in delivery vans, warehouse staging lanes, and parcel depots where floor space is limited but substantial loading volume is still required.
A common problem in route preparation is that mixed parcels gradually spread across floors, carts, and van compartments as the route load grows. Small packages disappear behind larger cartons, different delivery groups become mixed, and workers end up moving individual parcels several times before dispatch.
This model creates a dedicated vertical loading zone for cartons, poly mailers, apparel packages, document envelopes, returns, and other mixed e-commerce shipments. Parcels can be dropped directly through the wide open top, allowing continuous loading beside a conveyor, scanning station, sorting rack, or delivery van.
The open-top structure is deliberately simple. There is no lid to fold back and no zipper to operate between every parcel. For high-frequency sorting, this matters. When hundreds of packages are being scanned into route containers, shaving a few seconds from every loading action is considerably more useful than adding decorative hardware that employees will spend the entire shift ignoring.
The bright green exterior provides strong visual recognition in crowded warehouse and delivery environments. Different colors can be assigned to routes, districts, drivers, warehouse zones, returns categories, or branch destinations.
Orange pull loops are positioned along the upper side areas, giving workers practical grip points when the bag needs to be pulled closer, rotated inside a van, or repositioned beside another loaded container. Additional lower grip points help when the bag is sitting directly on the floor and cannot be comfortably moved from the upper edge alone.
A black reinforced base section protects the zone most frequently exposed to warehouse floors, vehicle interiors, loading platforms, and repeated placement. The contrasting lower section also makes the floor-contact area easier to inspect during routine warehouse use.
ACTSORTING supports customized production for courier companies, fulfillment centers, warehouse operators, postal contractors, retail distribution networks, distributors, and regional delivery systems. Dimensions, exterior colors, printed logos, handle positions, reinforcement zones, label pockets, route markings, closures, and material specifications can be adjusted for large-volume orders.
Founded in Guangzhou in 2013, ACTSORTING has more than ten years of experience in logistics bag manufacturing. Production is supported by a factory in Yangchun, Guangdong, with more than 400 employees and over 12,000 square meters of manufacturing space. The company operates under BSCI and ISO 9001 certification, supporting customized manufacturing, repeat-order consistency, controlled quality management, and international shipment.
Key Features
- 58 × 44 × 85 cm Tall Vertical Loading Structure
The upright format provides substantial parcel capacity while using a relatively compact floor footprint in warehouses, vans, and staging areas.
- Wide Open-Top Access for Continuous Sorting
Workers can load cartons, poly mailers, apparel parcels, returned goods, and other packages without repeatedly opening a lid, flap, or zipper.
- Side Pull Handles for Van and Warehouse Repositioning
Orange grip loops provide additional control when workers need to pull, rotate, drag closer, or reposition the bag inside crowded operational areas.
- Reinforced Black Floor-Contact Base
The lower section adds protection around the area most frequently exposed to concrete floors, vehicle surfaces, loading platforms, and repeated placement.
- Custom Color Coding and Commercial Production
Size, color, logo printing, handles, route identification, label windows, reinforcement structure, and other details can be customized for large-volume logistics projects.
Applications
This large open-top parcel sorting bag is suitable for courier vans, parcel sorting centers, fulfillment warehouses, last-mile delivery stations, postal depots, cross-docking facilities, returns departments, and regional distribution operations.
A typical application begins during vehicle route preparation. Workers scan parcels inside the depot and place all packages assigned to one driver or district into a dedicated green bag. Once the route is consolidated, the bag can be positioned directly inside the delivery van, helping prevent smaller parcels from becoming scattered behind shelves, seats, or other route loads.
Its 85 cm vertical height is particularly useful where operators want more capacity without increasing the floor area occupied by every container. Several bags can be arranged beside each other in a loading zone, with different exterior colors representing different delivery routes.
The same product can also be used for warehouse zone transfer, returns collection, temporary parcel staging, branch distribution, store replenishment, apparel logistics, document movement, and reusable internal transport loops.
Compared with a short sorting tote, this model provides greater vertical loading capacity. Compared with a rigid plastic bin, it adapts more easily to irregular package shapes and occupies less space when empty. Compared with a basic woven sack, its rectangular format, dedicated pull handles, and reinforced base provide more controlled handling in warehouse and vehicle operations.
Product Comparison
| Feature | Tall Open-Top Parcel Sorting Bag | Standard Soft Parcel Sack | Short Structured Tote | Rigid Plastic Bin |
|---|---|---|---|---|
| Standard Size | 58 × 44 × 85 cm | Variable | Usually lower profile | Fixed |
| Main Use | Route consolidation, van loading, warehouse sorting | General parcel containment | Warehouse sorting and picking | Fixed internal logistics |
| Body Format | Tall rectangular structure | Soft and loosely shaped | Wide and lower | Permanently rigid |
| Loading Access | Full open top | Open top | Open top / zipper / flap | Open top or lid |
| Floor Footprint | Compact relative to height | Variable | Larger for equivalent vertical capacity | Fixed |
| Side Pull Handles | Yes | Usually limited | Often included | Molded grips |
| Base Reinforcement | Dedicated black lower section | Usually basic | Depends on model | Rigid molded base |
| Mixed Parcel Fit | High | High | High | Limited by fixed walls |
| Empty Storage | Space-efficient | Very compact | Usually foldable | Occupies full volume |
| Color Coding | Highly customizable | Available | Available | Less flexible for custom programs |
| Best Use | Courier vans, route staging and high-capacity parcel sorting | Basic transport | Repeated picking access | Permanent warehouse circulation |
FAQ
What are the dimensions of this parcel sorting bag?
The standard configuration measures approximately 58 cm long × 44 cm wide × 85 cm high.
Why does the bag use a tall vertical design?
The vertical format provides substantial loading capacity while keeping the floor footprint relatively compact. This is useful in delivery vans, parcel depots, staging lanes, and warehouses where several route containers need to stand beside each other.
Why is the top left open?
The open-top design allows continuous parcel loading without repeatedly operating a zipper, lid, buckle, or flap. It is particularly suitable for sorting lines and route preparation where packages are loaded frequently.
What are the orange side handles used for?
The side handles provide additional grip points when workers need to pull the bag closer, rotate it, reposition it inside a delivery van, or move it across a staging area.
Can ACTSORTING customize the dimensions, color and logo?
Yes. ACTSORTING supports customized dimensions, exterior colors, logo printing, handle positions, route markings, transparent label pockets, reinforcement structures, material specifications, and other details for large-volume orders.
